Filter by
-
EFS POLYURETHANE BUSH KIT | UK742
$140.00– Qty req 1 – Can be used as OEM replacement bush kit for vehicles up to 07/2009. For vehicles 08/2009 on, must be used with GR356 & GR358EX greasable shackles & pins, sleeves to be removed. Use lithium or silicon based grease only
-
EFS POLYURETHANE BUSH KIT | UK742
$140.00– Qty req 1 – Can be used as OEM replacement bush kit for vehicles up to 07/2009. For vehicles 08/2009 on, must be used with GR356 & GR358EX greasable shackles & pins, sleeves to be removed. Use lithium or silicon based grease only
-
EFS SWAY BAR BUSH | 10-1125
$29.00– Qty Req 1 – SUITS 31mm SWAY BAR. PLEASE CONFIRM BEFORE ORDERING
-
EFS SWAY BAR BUSH | 10-1125
$29.00– Qty Req 1 – SUITS 31mm SWAY BAR. PLEASE CONFIRM BEFORE ORDERING
-
EFS SWAY BAR BUSH | 10-1125
$29.00– Qty Req 1 – SUITS 31mm SWAY BAR. PLEASE CONFIRM BEFORE ORDERING
-
EFS FIXED PIN | GR356
$61.00– Qty req 2 – Use UK742 bush kit & remove sleeve before installing shackle pin
-
EFS FIXED PIN | GR356
$61.00– Qty req 2 – Use UK742 bush kit & remove sleeve before installing shackle pin.
-
EFS SWING SHACKLE | GR358
$75.00– Qty req 2 – Use UK742 bush kit & remove sleeve before installing shackle pin.
-
EFS SWING SHACKLE | GR358EX
$114.00– Qty req 2 – Extended Shackle. Use UK742 bush kit & remove sleeve before installing. Offroad use only.
-
EFS ABS RELOCATION BRACKET | 10-1080
$25.00– Qty req 1 – ABS extension bracket. For ABS models only
-
EFS ABS RELOCATION BRACKET | 10-1080
$25.00– Qty req 1 – ABS extension bracket. For ABS models only
-
EFS BRAKE SPACER BLOCK | 10-1009
$83.00– Qty req 1 – Brake proportioning valve spacer block
-
EFS BRAKE SPACER BLOCK | 10-1009
$83.00– Qty req 1 – Brake proportioning valve spacer block
-
EFS SWAYBAR SPACER KIT | 10-1081
$120.00– Qty req 1 – Front sway bar 40mm spacer blocks
-
EFS SWAYBAR SPACER KIT | 10-1081
$120.00– Qty req 1 – Front sway bar 40mm spacer blocks
-
EFS RUBBER BUSH KIT | RBK1093
$214.00– Qty req 1 – 2 Degree offset radius arm and panhard rod bush kit
-
EFS TRIM SPACER | 10-1029
$13.00– Qty req 2 – Front 10mm spacer for trimming or raising vehicle height
*ALL LIFT HEIGHTS ARE ESTIMATED.Â
*Quantity required is the required amount for each application. Products are also available for individual sale so it is recommended reviewing the quantities selected for your vehicle to ensure they are correct before confirming order. Please refer to product and catalogue notes to confirm quantities required.
Any trademarks owned by vehicle manufacturers or images of entire vehicles on this website are intended only to indicate that the product for sale is suitable for that particular make of vehicle. Use of third-party trademarks or images of vehicles are not intended to indicate any association with, sponsorship by or approval of the manufacture of the vehicle or the owner of the trade marks.